Rio Outbound Short WF10F/I Review
So I finally got a 10wt line for my 10 wt Redington Vapen Red. A sensible thing to do. The line is a Rio Outbound Short WF10F/I (in the coldwater formulation) that has a 12ft clear intermediate tip in front of the white floating head and light minty green running line. Factory welded loops at both ends. After my my over-lining fiasco (with a 12wt Airflo wind crusher) it was with a sense of keen anticipation that I wound the new line onto the Sage 4210 reel. I quickly threaded the line through the rod rings and headed over to the local school field to learn how good the line was.
I wont beat about the bush: it took a few minutes getting used to the short head, and the other characteristic which is common to fly lines with dual densities, the front taper has a bit of a kick. Once the introductions were over it was time to see how far this canon could shoot. After a few warm ups I gave it my best shot: it not the prettiest cast, with a slight breeze from my left, but it flew and pulled the line out until the backing knot was at the first stripping guide. That was 96 of 100 feet of line out of the rod tip. A personal best. I am a happy swoffer: my dream combo is finally all together and can send a fly further than I’ve been able to do before.
The line itself is very nice: my concern was that the cold water formulation would result in wiry handling but instead it is seductively supple and smooth even in the cold of a July evening. The real test will be in the water on a cold winter dawn.
There’s nothing like new tackle to pump that urge to go fishing! Time to point this outfit at some water, preferably with fish in it, and get it into fish fighting mode.